Safe Acid Descalex powder

Fast and effctive scale remover. It is a superior heavy duty POWDER containing accelerators, corrosion inhibitors & wetting agents with scale dissolver. Specifically formulated to remove rust and [+] Read More...
Information:

An acidic cleaning powder with a sulphamic acid base and a corrosion inhibitor that is particularly effective for removing calcium carbonate and other inorganic scale deposition. We are manufacturing this product with various colour code indicator to get proper uses and actual dose requirement by understanding change of colour during cleaning operation. 

Active Matter:
98-100
IMPA Code:
551408
Packing Size:
25.00 Kg.(PWD)
Available Packing Size:

5 / 20 / 25 / 50 Kg  JAR

Code:
RXSOL-54-1008-025
For INDIA based requirement mail us at rxmarine@gmail.com  or you may call us +91 22 65113333 / 65115555 / 65119999  while  For Gulf Middle East email id id  dubichem@gmail.com  & Tel No.   00971 9 2242524 / 2242534 We are Operational at following location with STOCK POINT Surat, Kandla, Gandhidham, Mundra, Hazira, Tata, Ranchi, Kolkata, Haldia, Buz Buz, Paradip, Vizag ( Visakhapatnam ), Tuticorin, Cochin, Goa, Mumbai, JNPT, Pirpav, Chennai, Ennore, Fujairah, Sharjah, Dubai, Middle East  

 

Safe Acid Descalex powder
Application:
APPLICATION : Boilers, calorifiers, heat exchanges, diesel engine cooling system, condensers, evaporators & other type of equipment where rust & scale form.  Appearance Reddish / [+] Read More...
Using Procedure:
Suitable and very popular product for DESCALING of high and low pressure boilers, Heat EXCHANGERS etc. Its corrosion inhibitor blend PROVIDE metal protection This is mixed with fresh water 3 to 20 percent [+] Read More...
Note:
HS CODE 34021300 Characteristic: -Powder product-safe and easy handling and storage.    -Fast and effective scale remover,It is water-soluble,non-flammable, non-volatile and non-hydroscopic Inhibitors [+] Read More...
Technical Specifications:

PRODUCT PROPERTIES of Safe Acid Descalex powder

HS CODE of Safe Acid Descalex powder 34021300

Appearance Reddish / Yellowish / white – Powder ( without indicator )  
Density 1.2g/cm3  
pH (10 wt %):1.1  
Compatibility  
Metal    Avoid aluminium, zinc, tin and their alloys. Avoid galvanised surfaces  
Rubber No known effect  
Packaging Order No.: RXSOL-54-1008-025 Size (in kg)25 , 5
Remarks:

-   Prevent run off water from entering drains if possible

Formation of Calcium Sulfate is main cause for SCALE formation :::

The principal problem potential posed by sulfate ions in water is the possibility of calcium sulfate scale formation.  Precipitation of calcium sulfate can occur when high concentrations of both calcium and sulfate exist simultaneously.  There are three primary areas of water treatment in which calcium sulfate precipitation may occur boilers, cooling systems, and ion exchangers operating in the hydrogen or acid mode.

In boilers, calcium sulfate scale formation has been reduced to a minimum by modern treatment practices.  The low hardness levels largely preclude calcium sulfate boiler scale.    By contrast, cooling systems are subject to calcium sulfate scale deposition because the makeup is usually not treated for hardness removal.  Cooling water is usually treated with sulfuric acid for pH control, and the makeup is cycled, i.e. concentrated.  Calcium sulfate scale deposition can  result unless the cycles of concentration are properly controlled in conjunction with the proper use of scale control chemicals.  Cation ion exchangers regenerated with sulfuric acid also can pose a major calcium sulfate problem. Calcium sulfate precipitation can be avoided by controlling the acid concentration and the flow rate through the exchanger.  

Sulfate content can be calculated in Laboratory by using this method ::: http://rxmarine.com/SULFATE-TEST-KIT

Safe Acid Descalex powder