Product Notes

USE AND DOSING (continued) :

solution through the tank washing system for a period of at least two hours per machine drop, with a cleaning time of 4 hours per tank usually being sufficient.

A minimum temperature of 70°C is recommended, since the cleaning ability is enhanced and the cleaning time shortened. However, the solution may be used at ambient temperature.

Tip: Do not use the entire quantity of IGS CLEANER in one solution for all tanks to be cleaned. Keep a few drums for boosting the solution’s cleaning efficiency for the last few tanks.

When recirculation is completed, wash down with water, using the maximum pressure available. In the case that stains remain on the surfaces, spot clean with undiluted IGS CLEANER directly on the stained area. Allow a reaction time of 30 minutes and then rinse with water. Do not leave the product to dry on bare coating.For persistent deposits, agitation by scrubbing will assist the cleaning operation. Heated water will increase the cleaning effect.

For general use, dilute appropriately,depending on the contamination and use conventional cleaning methods, such as brushing, scrubbing or spraying. Allow the product to act and then rinse with fresh water before drying.

PRODUCT PROPERTIES :

It is highly recommended to always test all cleaner solutions on a small area of tank coating, before full scale application.
 

Appearance : Odor
Density at 20°C: Flash Point
pH (undiluted): Solubility
Compatibility(concentrated)
Red liquid :Soft
1.05 ± 0.05 g/cm: None
13.0 ± 1.0
Soluble in water :Incompatible with aluminum, zinc, tin and their alloys

Extremely effective for removing inert gas soot.

• Effective cleaning of stainless steel and epoxy coated tanks.

• Strong deodorizer.

• Safer to use, substituting liquid austic based cleaners.

• Heavy duty, water-based leaner.

• Versatile for multipurpose leaning.

• Cost effective: dilute for mostcleaning needs.

• Contains neither hydrocarbonsolvents, nor nonyl phenol ethoxylates or other estrogenic compounds.

• Non-flammable & non-toxic.

• Bio-degradable, minimizing environmental concerns.
Inert Gas Soot. 
Mineral oils, petroleum products,drying or semi-drying oils, carbon deposits, dirt, grease and grime.
Odor problems.

APPLICABLE AREAS:

•  Cargo tanks and bulkheads.
•  General cleaning.