Product Notes

Titration Procedure (insert “Information”)

  1. Using a pipette, take a 5 ml sample of Rust Remover from the cleaning bath
  2. Put the 5 ml sample into the mixing flask
  3. Add 10 ml of water then stir well to mix
  4. Add 5 drops of phenolphthalein indicator
  5. Counting the drops added, add 10N Sodium Hydroxide one drop at a time until the solution turns from clear to purple. Swirl between drops. The number of drops needed is the concentration of the Rust Remover.

Precautions : 

ƒ Not intended for spray use.
ƒ Do not use or mix with chlorine containing cleaners or solutions as chlorine gas can be released.
ƒ Will gradually attack steel tanks, heating elements and piping
ƒ This product is highly acidic. The product concentrate causes burns of the eyes and may cause burns of the skin.

               Future                                   Benefit
Single-step process : Does not need separate cleaning step prior to rust removal
Versatile : Effective on a variety of metals and soils
Effective : Quickly removes rust and other oxides from metal surfaces.
Flexible : Use Can be used in immersion and hand-wipe applications.
No VOC : No VOC permits required
Mild Odor :  Minimal irritation to operators and other employees

Handling : 

Keep away from sparks or flame. Do not breathe dust or vapors. allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection.Wash thoroughly after handling. Acid reacts with water and can splatter acid onto personnel. When diluting, cautiously mix product and water together while stirring

Storage : 

Store containers in a cool, dry place. Do not pressurize, cut, weld, braze, solder, drill, or grind containers. Keep containers away from heat, flame, sparks, static electricity, or other sources of ignition.