Product Dose

Directions for Use and Dose Rates
The most effective descaling is accomplished by circulation. In the case of small components, the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease and sludge, then pre-cleaning with Seaclean Plus or Enviroclean. Depending on the extent of scaling, use a solution of 2.5-10% Descalex. The solution will have a red colour which disappear when the solution is neutralised. Whenever possible, the solution should be heated to 60┬░C. Neutralised solutions can be reactivated by adding more Descalex until the red colour reappears. This should not be done more than twice. Descalex should not be used on aluminium, zinc, tin or galvanised surfaces. Descaling of Boilers, Descaling of Diesel Engine Cooling Water Systems, Condensers,

Evaporators, Calorifiers, Heat Exchangers:
The strength of the acid can be enhanced by adding 1 part sodium chloride (common salt) to 20 parts of Descalex. This enhancement of the cleaning solution, however, should not be used when descaling diesel engine cooling water systems. After use of Descalex a 0.5% solution of Alkalinity Control in fresh water should be used for neutralisation.

RXSOL DESCALEX improves heat transfer efficiency in heat exchangers and improve flow in pipes.
RXSOL DESCALEX effectively dissolves calcium and magnesium scale, hard water scale and variety of deposits.

Descalex Powder Manufacturer

Descalex Powder Exporter

Descalex Powder Supplier