Product Dose

Antiscalant RXSOL-33-3302-230  performance is achieved when the chemical is injected downstream of multimedia filters and upstream of cartridge filters. For maximum effectiveness, Antiscalant RXSOL-33-3302-230 should be added prior to the static mixer or cartridge filter housing. For potable  the maximum dosage is 10 mg/L. Maximum dilution is 10% with RO permeate or DI water

Dosing Guidelines: 

The typical dosage range is between 2 to 5 ppm or Typical dosage range is between 2 and 6 mg/L.. A site‐specific dose can be determined using computer program. Like any injected chemical, over or underdosing may cause unnecessary membrane system fouling. Please contact the Avista customer service department for customized dosing instructions.

Dilution:

This product is formulated to be injected neat. However, if a dilution is required, use demineralized or RO permeate water. If neither of these is available, softened water may be substituted. The dilution for Vitec 1000 should not result in a solution strength of less than 10%. This guidelin will protect the effectiveness of the internal bacteriostat which inhibits bacterial growth in the drum and feed tank.Maximum dilution is temperature related as shown below.

Temperature, °C     Maximum Dilution, %
<30                                        12
30-35                                     25
>35                                        50

230  performance is achieved when the chemical is injected downstream of multimedia filters and upstream of cartridge filters. For maximum effectiveness, Antiscalant RXSOL-33-3302-230 should be added prior to the static mixer or cartridge filter housing. For potable  the maximum dosage is 10 mg/L. Maximum dilution is 10% with RO permeate or DI water

Dosing Guidelines: 

The typical dosage range is between 2 to 5 ppm or Typical dosage range is between 2 and 6 mg/L.. A site‐specific dose can be determined using computer program. Like any injected chemical, over or underdosing may cause unnecessary membrane system fouling. Please contact the Avista customer service department for customized dosing instructions.

Dilution:

This product is formulated to be injected neat. However, if a dilution is required, use demineralized or RO permeate water. If neither of these is available, softened water may be substituted. The dilution for Vitec 1000 should not result in a solution strength of less than 10%. This guidelin will protect the effectiveness of the internal bacteriostat which inhibits bacterial growth in the drum and feed tank.Maximum dilution is temperature related as shown below.

Temperature, °C     Maximum Dilution, %
<30                                        12
30-35                                     25
>35                                        50

Packaging and Storage:

Standard regional pack sizes are listed below and custom packaging can be provided worldwide. This product should be protected from freezing.

Specifications
Appearance: Yellow to liquid
pH (10% solution): 2.9

Specific Gravity@20oC:

 1.67 - 1.2

 Packing 30 Kgs, 230 Kgs drum.

 

 

Antiscalant Ro Manufacturer

Antiscalant Ro Exporter

Antiscalant Ro Supplier