Product Dose

Excellent , concentrated and very effective cement remover with powerfull dissolving properties used on cement and bulk carriers.

The hardened concrete is saturated with Back-Set, either with a brush or by spraying. After 15-20 minutes, the area is again saturated with the chemical. The concrete typically begins to soften in 20-30 minutes,and can be rinsed off with water.The amount required for dosage can be obtained BY knowing the deposition composition as well as nature of cement to be removed.5 to 20 % recommended .These are recommended values based on experience. For optimum results dose RXSOL-22-2202-025 directly to the surface .

 

The amount required for dosage can be obtained BY knowing the deposition composition as well as nature of  CEMENT to be removed . 5 to 20 % recommended .These are recommended values based on experience.

For optimum results dose RXSOL-22-2202-025 directly to the surface

Undiluted : In cases where we deal with heavy deposit build–up, CEMENT REMOVER must be applied undiluted.
Diluted : In cases of light deposition, on large surface areas, a solution between 10–40% may be used.

METHOD ::: 
1.For heavy deposition and thick layers  of cement, a concentrated and  stronger cleaner will be necessary to cut through the layers of cement.
2.Use a scraper, metal scrubber or flat head screwdriver to remove as much of the cement as possible.
3.For the remaining cement, apply this chemical 
4.Once the cement loosens, scrub the area with a scrubber until it is all removed from the surface.
5.Rinse the area well with clean water.
6.Clean the area with alkaline soap and water 
7.Flush system completely.