Product Dose

In general, use 1/2 - 1% hot water wash cycle solutions  or 5-10 grams per liter. For manual, soak, circulate or ultrasonic use, make a 1% solution in warm or hot water. For abrasive scrubbing, make a paste. For difficult soils, raise water temperature and use more detergent. Wear protective gloves and eyewear when handling. RINSE THOROUGHLY--preferably with running water. For critical cleaning, do final or all rinsing in distilled, deionized or purified water. For food contact surfaces, rinse with potable water. Used on a wide range of glass, ceramic, plastic and metal surfaces. Corrosion testing is advisable. 

Cleaning method:
Laboratory warewashers, dishwashers, washer-sterilizers, washersanitizers, cart washers, spray washers, electrocleaning, ultrasonic cleaners, clean-inplace and manual cleaning if proper skin and eye protection is used. 

Cleaning Validation Methods:
Test a parameter of rinse water before and after rinsing the cleaned surface. No significant change in the parameter indicates no detectable residue. Parameters measured include: pH, conductivity, resistance, spectrographic methods, total organic carbon,and surface analysis.