Biocontrol – Latest efficient Fuel Stabilizer

Engines that work for almost all times of the day without breaking a sweat need proper and timely maintenance. Whether your engines are that of your vehicle, lawn mower or snow blower or commercial and industrial engines, all need some time span to recover. When giving the engines a relaxing time between operations, the best way to tune them up for next efficient working phase is to use fuel stabilizer. Curbing one’s engine’s fuel degradation is a crucial step which needs to be taken up at periodic intervals. Fuel stabilizers are agents that consist of powerful fuel additives which save the engines from corrosion and fuel degradation aftereffects.

As the fuel breaks down in day to day working, various gums and varnishes that are formed stick to the walls of the engine causing clogged valves, fuel liners and carburettor jets. This in turn leads to several starting as well as operational issues.

Fuel stabilizers inhibit corrosion in engines thereby leading to smoother operations. These agents are readily available in market to be used directly in the cleaning process. These fuel stabilizers are self-dispersing agents which do not need any dilution or prior preparation.  It can be poured directly in the fuel tank to be cleaned. The amount of fuel stabilizer to be used depends entirely upon the degree of contamination to be targeted.  The product can be used in fuel tanks, water systems and luboil systems.

The fuel tank needs to be thoroughly flushed with fresh clear water to do away with any loose dirt and grease. After it is done, the stabilizing agent can be directly poured in the tanks and left for a considerable time of preferably 24-48 hours depending upon the contamination level. Ater a considerable time has elapsed; wash the flush the fuel tank thoroughly to get a clean and bacteria/algae sediment free fuel tank.

The system should be drained out and then refilled with fresh water containing the fuel stabilizer. The solution needs to be left to act for preferably 48 hours to act upon sediments and corrosions. After 48 hours, the system should be immediately drained from all outlets and flushed with ample fresh water.

Before treating luboil systems, they should be manually cleaned thoroughly as efficiently as possible to remove sludge and silt. This should be followed by cleaning with water mixed with the fuel stabilizer. The whole system should be flushed out thoroughly after proper cleaning.

BioControl Fuel Stabilizer (RXSOL-70-7012-025) have effective fuel stabilising agents that acts rapidly and effectively on bacteria and algae contamination in oil and water.  Its specific surface active composition acts on large areas at a single time. It is available in an easy-to-use liquid formulation following a simple monitoring programme. It can be used effectively in both cooling water systems as well as oil storage facilities. The use of BioControl varies from industries such as Marine, Industries, Commercial uses and       auto industry. It protects engines against corrosion, inhibits rust and corrosion of engine parts, prevents gum and varnish build up due to its surfactant ingredients and protects against degrading effects of water in fuel –thanks to its water protection inhibitors.

RX Marine has always emphasized on providing world class products to its consumers and always advises its consumers to read the instruction leaflet carefully before using any of their products. Always use proper protective gloves while using any chemical agents. Though the fuel stabilizer is available in easy to be used arrangements, its cleaning process should be handled with care. The stabilizer should be kept away from direct sunlight in a cool dark place and away from any flammable material.

Click here for more details