Chembreak

 

 

RXSOL

CHEM    

  BREAK      

 

For  Cleaning  of Engine Rooms and Cargo Tanks after Mineral Oil /Lube Oil  & Slope Back Oil

 
     
    

 

 RXSOL-20-2006-025

Chem Break is an all purpose degreaser emulsifiers . Specially designed for engine room and cargo tank cleaning . Main feature of this product is that it  finally dissociate slop emulsion to separate oil and water . This provide us  the ability to dispose  waste solution as per MARPOL & IMO rules and regulation .  It is an excellent blend of powerful solvent base and emulsifying inorganic products .

Packaging   :  25 / 210 Ltrs.


 
Applications :

  • Ideally suited for slop tanks.
  • Recommended for local cleaning & degreasing of engine rooms, bilges & tank tops.
  • Low toxicity, non - corrosive.
  • Highly effective, economical solvent cleaner.

                     Tech Spec   

Dosage :- Dose rate and results will vary depending on amount of contamination . For light contamination dilution with water up to 1:20 is recommended where as medium contamination dilution with Petro solvent , And for heavy contamination neat RXSOL CB 2006 is suggested to use.

Video Clips of Usage Procedure 

Procedure of use :-  

 RXSOL-20-2006-025 is recommended for local cleaning & degreasing of engine rooms, bilges & tank tops. It may be applied by brush, spray, immersion, soaking, or any other conventional means . RXSOL-20-2006-025 is used neat. Allow a residence time of at least 20- 45 minutes where possible, to ensure good penetration & emulsification. Finally wash the system with hot water & high pressure. The emulsion residue after cleaning must be allowed to separate in a holding tank for atleast 3-5 hours before passing through an oily water separator.

For Tank Cleaning after Mineral Oils/ Lube Oils / Slope-Black Oil

Method 1: Fill the tank with 1-35 litres per ton wash water. Best results are obtained when water is heated to a temperature between 65°C & 80°C then stripped constantly and transferred to a holding tank for separation. The time for this will vary depending on amount of RXSOL-20-2006-025 used & nature of oil being cleaned. Generally,12 hours should be sufficient before the water phase can be removed.

Method 2 : Direct Cleaning.Spray directly RXSOL-20-2006-025 on tank surfaces to be cleaned, left for at least 30 minutes.Finally wash with hydrogating (high pressure) machine. Hot water between 50°C & 80°C recommended.
  

 Related Products   :   

Sea Cleaner Plus

EdgeSol Cleaner

  Chem break,

Tank Clean HD

 click  for Dream Bundle Offer

    
 

 

 
   

 

Our  Services  : Private Labelling | Lease Warehouse | Logistics Sevices  |   Memebrship PlanCredit Policy|  Technical Bulletin

 youtube   Twitter   Facebook

Subscribe and Like  RX Marine Newsletters and Get 1 %  Discount on Products

 Email : 123@rxmarine.com

 
 

,