- About us
- Contact us
RXSOL-40-4035-025 corrosion inhibitor is a catalyzed liquid oxygen scavenger , This formulation is especially effective way of protecting ferrous and aluminum metals from corrosion due to adverse e [+] Read More...
Powder Application:- For average conditions the recommended dosage is 0.30 ounces (weight) per cubic foot (28 Liters) of enclosed space.( 300 g/cubic meter) Concentration can be increased to protect [+] Read More...
Dose:- RXSOL-40-4035-025 The objective is to maintain a hydrazine residual between 0.05-0.2 ppm depending on operating pressure and boiler designe. Actual consumption is determined under operating conditions. A normal dosage is approximately 1 ltr. per day, depending of system layout.
More about Water Boiler Treatment & Powder / liquid Inhibitors scales are very damaging to the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boile [+] Read More...
Safe Plant Handling
Provides corrosion protection in the liquid and the vapor phase
When used in hydrostatic testing the product provides protection in liquids below, above and at the liquid levels
Protection of recessed and hard to reach areas. Complicated valves and the interior surfaces of piping and equipment, which are often difficult or impossible to reach, are protected with true Vapor Corrosion Inhibitor action Easy to Useits POWDER can be applied by either blowing with conventional air blasting equipment or other methods using compressed air . Can be applied by sprinkling , rinsing or dipping metals in a solution of RXSOL-50-5007-025 , hydrotest solution, metalworking fluids, coatings, adhesives and water treatment formulations.
Risk of serious damage to eyes. In case of contact with eyes, rinse immediately with plenty of water & seek medical advice. Wear suitable gloves and eye / face protection