Railway Maintenance-35

Can cause severe burns to skin, eyes, and internal organs.

For industrial use only by trained personnel. Will etch glass. Avoid contact with skin, eyes, and clothing. Do not take internally.

Protective clothing such as goggles, face mask, rain suit, and rubber gloves must be worn. Check gloves to insure no pinholes are present. Contact with diluted material cleaner may not cause immediate pain, redness, or burning until several minutes have elapsed.

Truck Wash Brightner Cleaner manufacturer and supplier in Mumbai, Nashik, Pune, Kandla, Gandhidham, Surat, Kolkata, Vishakhapatnam, Chennai, Fujairah Sharjah Abu Dhabi Dubai, Muscat Barka Ruwi OMAN, Kenya Nairobi AFRICA, Canada, Sudan, Yemen AFRICA

#TruckWashBrightener_Muscat
#TruckWashBrightener_Dubai
#TruckWashBrightener_Mumbai
#TruckWashBrightener_Nairobi

KEEP CHILDREN AND PETS AWAY FROM TREATED AREA UNTIL IT IS COMPLETELY DRY. For mustard stains, consider prolonged exposure (20 minutes to four hours) to an ultraviolet light. 4. Store in cool, dark area. High heat and sunlight exposure can dramatically impact shelf life and effectiveness of product. Store only what you need in the work vehicle and keep as far away from 

OXY Bleach Triplephase Stain Remover manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of OXY Bleach Triplephase Stain Remover at a competitive price from us. We have ready stock of OXY Bleach Triplephase Stain Remover in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

USES:

Deep cleaning of outdoor condenser coils to restore efficiency and increase performance of the system.

DILUTION RATIOS:

Because RXSOL-41-8672-025 is highly concentrated, it must be diluted prior to use. Dilution also improves penetration into the coil and increases product performance. Actual dilution ratios will vary according to the application. The following is intended as a general
guideline:

• Up to 8-10 parts water to 1 part  RXSOL-41-8672-025 coil cleaner  for light cleaning and brightening, when expanding foam is not required.
• 3-5 parts water to 1 part RXSOL-41-8672-025 coil cleaner on difficult cleaning tasks.
• 1-2 parts water to 1 part RXSOL-41-8672-025 coil cleaner  for use as a high foaming,aluminum finned, air cooled condenser coil cleaner.Use the minimum concentration required to accomplish your task.

Note: Do not use RXSOL-41-8672-025 coil cleaner at concentrations greater than 1:1 (less than 1 part water to 1 part RXSOL-41-8672-025 coil cleaner. Rinse the treated surfaces as well as the surrounding area thoroughly after use.

APPLICATION METHODS:

Low pressure, acid resistant tank sprayers are recommended.
Regardless of application method, avoid inhalation of mist or contact of liquid or mist with skin.

SUGGESTED INSTRUCTIONS FOR USE:

•  When handling RXSOL-41-8672-025 coil cleaner or any other strong chemical, be sure to wear chemical imperviousgloves,apron and splash goggles.
   
• Determine required dilution ratio for the specific application. It is recommended to start with a dilution ratio of 10:1 and increase concentration until the desired results are achieved.
   
• As with mixing all acids, place the desired amount of water into the tank and then add RXSOL-41-8672-025 coil cleaner
   
•  Turn off fans and allow hot coils to cool before applying.
   
• Using plain water, wet both the condenser coil as well as the area surrounding the equipment. Wetting the coil with water aids in product penetration and performance.
   
• Apply the properly diluted product to the coil surface. Whenever possible, apply solution from the outlet side of the coil. Allow product to remain on surface, normally 5-10 minutes. Do not allow product to dry on the coil. Note: In extreme cases, application may have to be repeated to achieve desired results.
• If foaming does not occur, check for extreme grease buildup which will slow cleaning process. Foaming may not occur if coil is coated or painted.
   
•   Rinse coils, tools and surrounding area thoroughly after completing the coil cleaning process

Coil Cleaner manufacturer, exporter and supplier in Dubai, Muscat, Sharjah, Sohar, Abudhabi, Ajman, Barka Oman, UAE Middel East and in India, Mumbai, Surat, Kolkata, Chennai, Ranchi, Tata Jamshedpur, Dhanbad, Varanashi, UP BIHAR, Canada, Nairobi Kenya Africa, Canada

PRODUCT PROPERTIES 

APPEARANCE Clear Colourless Liquid 
COMPATIBILITY METAL No known effect RUBBER May Swell 
PACKAGING Order no.: Size 50 / 25 LTR RXSOL-18-1014-050 

FIRSTAID &STORAGE:- Contact with skin can cause serous chemicals burns .Avoid contact with skin & eyes.Wear PVC gloves while handling. Do not take internally. Spl-ashes of the product or its solutions on the skin or clothing should washed immediately with cupious amount of water . If the eyes are affected should be washed with water for at least 15 minutes and seek medicals attention sought immediately. Keep drums tightly closed when not in use.

Thinner Solvent manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Thinner Solvent at a competitive price from us. We have ready stock of Thinner Solvent in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Air Cooler Cleaning Chemical manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Air Cooler Cleaning Chemical at a competitive price from us. We have ready stock of Air Cooler Cleaning Chemical in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.