Browse : A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z  
Featured Products 

Clean Air deodorizer-24

Castor Oil Industrial

Product Description | Product Application | Product Notes| Product DOSE
Castor Oil manufacturer and supplier in India, UAE - Middle East, Oman CASTOR OIL is a Refined Vegetable Oil from Castor beans. ... This oil is one of the most highly unsaturated vegetable oils. 
Code:
RXSOL-92-1264-210
Other Equivalent Brand

Castor Oil Industrial, Natural castor bean vegetable oil

Short Description:
Pale yellow or almost colourless, transparent, viscid liquid with a taint, mild odor.
Generic Name:
Natural castor bean vegetable oil
Active Matter:
99.5
IMPA Code:
550865, 550866
Castor Oil Industrial
Application:
Castor oil is a natural remedy derived from the castor bean (Ricinus communis). The main component of castor oil is ricinoleic acid, a type of fatty acid shown to possess anti-inflammatory properties. 
Using Procedure:
Pale yellow or almost colourless, transparent, viscid liquid with a taint, mild odor. Uses: Plasticizer in Lacquers and Nitrocellulose, Polyurethane coatings, Elastomers and Adhesives, surface active agents, industrials lubricants, electrical insulating compounds etc.
Note:
Castor Oil is usefull For Healthier Hair & Skin Stimulates Hair Growth Penetrates deep into the skin Softens and Hydrates it Helps Glossy Shine to Dry Lips Long, Healthy and Beautiful Nails
Technical Specifications:
Product Name : Castor Oil
CAS number : 8001-79-4
UN number :  
Formula :  
Odour : Faint , Mild
Solubility in water : Insoluble
Density : 0.955   at 25    oC
Boiling point :  oC
Melting point : -12  oC
Viscosity : 9.35 cp at 20 oC
Flashpoint : 229  oC
Explosive limits :  
Vapour pressuer :  
Skin absorption/irritation : NO
TLV       Country :  
Pollution category   1994 : D
Remarks:

Castor oil incredible benefits for beautiful skin and hair.

Castor Oil are for Domestic, industrial and technical use in paints, printing inks, synthetic (alkyd) resins, varnishes, adhesives, plasticisers, sealants, leather, foundries, wood & timber preservation / treatment, glass putty, etc. Also, the biodiesel or methyl esters find use as fuel, solvent, lubricant, adjuvant, cleaner, metal pre-treatment (degreasing). Methyl ester sulfonates can be prepared from these for use in detergents.

Also popular supplier of Neem oil, Moringa oil, Castor oil, Karanja  oil ---
 
Neem Oil Low Aza
Neem Oil High Aza
Karanja Oil 
Cold pressed Castor Oil 
Moringa Oil

Typical Chemical Composition The fatty acid composition is as follows
Palmitic   1-2%
Stearic     1-3%
Oleic        2-5%
Linoleic     3-7%
Ricinoleic  85-90%
 

Typical Physical properties

Appearance            :Clear  greenish/yellow liquid

Odour                     :Typical of a vegetable oil

Boiling point           :Above 300° C

Flash point             :Above 300° C

Relative density      :0.9550 - 0.9660 (@20° C)

Solubility in water    :Insoluble

Solubility other        :Soluble in most hydrocarbon solvents

Viscosity (@25° C)    :700 ± 20 centipoise

Industrial Castor Oil Use: For continuous lubrication of moulds to prevent the molten aluminium sticking to the moulds during casting of  rolling slabs, billets and standard ingot castings and also acts as releasing agent.

Castor Oil exporter and supplier in India and Middle East UAE. We are keeping ready stock of Castor Oil and one of popular supplier in Mumbai, Gandhidham, Chennai, Visakhapatnam, Kolkata, Paradip, Fujairah, Sharjah, Dubai, Abudhabi, Muscat Barka Oman, Bajrain, Sudan, Naiorbi Kenya Africa Uganda

Castor oil FSG is produced by refining commercial grade castor oil using bleaching and filtering processes.
Applications:
 It is used as a key component in the pharmaceutical and cosmetic formulations
 As a transducer fluid in sonar
 As a dielectric material in electrical condensers
 An integral component in coatings of vitamin and mineral tablets to serve as a lubricant
 As a raw material for the production of value added derivatives from castor oil
 Used in the manufacture of polyurethane casting resins
 Reacts with styrene and diisocyanates to produce polymers and varnish components
 In hydraulic fluids for automobiles, trucks and machinery
 As Capacitor impregnate
 As an ingredient for petroleum oil-field de-emulsification
 
Refined Castor Oil First S
Refined castor oil is extracted from Refined Commercial Grade Castor Oil that is produced by crushing the steam-cooked castor seeds of the expeller. F.S.G. Castor Oil is Castor Oil bleached to British Standard Specifications. Castor oil is a yellow viscous liquid free from suspended matter and insoluble in water. Refined Castor Oil is used as an essential component that serves as a lubricant in vitamin and mineral tablet coatings and as a raw material for the manufacture of value-added castor oil derivatives. The Refined Commercial Grade Castor Oil is processed by the bleaching and filtering method that helps to minimize the quality of colour, F.F.A (Free Fatty Acid) and moisture. Furthermore, Refined Castor Oil is used to manufacture other derivatives of castor oil and useful industrial products.Castor oil has long been used commercially as a highly renewable resource for the chemical industry. India is a net exporter of castor oil, accounting for over 90% of castor oil exports, while the United States, European Union, and China are the major importers, accounting for 84% of imported castor oil. Castor beans are cultivated for their seeds yielding a viscous, pale yellow non-volatile and non-drying castor oil. Castor beans, the source of castor oil, contain some allergenic (2S albumin) proteins as well as ricin; however, processed or refined castor oil is free from any of these substances and can be safely used in pharmaceutical applications. This can be attributed to its wide range of biological effects on higher organisms. Ricin is found exclusively in the endosperm of castor seeds and is classified as a type 2 ribosome-inactivating protein. Type 2 ribosome-inactivating proteins such as ricin from castor oil are lectins, which irreversibly inactivate ribosomes, thus stopping protein synthesis and eventually leading to cell death. This makes ricin a potent plant toxin.

Castor oil is a promising commodity that has a variety of applications in the coming years, particularly as a renewable energy source. As a source of biodiesel, recent studies showed that the biodiesel synthesis from castor oil is limited by a number of factors that include having the proper reaction temperature, oil-to-methanol molar ratio, and the quantity of catalyst. FSG Castor Oil finds applications in a variety of uses and is starting product for all others Castor derivatives. It is used as an ingredient in pharmaceutical and cosmetic applications, as lubricant component of coatings for vitamin and mineral tablets, as an ingredient for petroleum oil-field de-emulsification, as a sonar transducer fluid, in manufacture of polyurethane casting resins, and in hydraulic fluids for automobiles, trucks and machinery.
Castor Oil Industrial
:
Packing Size:
210.00 Ltr.
Available Packing Size:
Natural castor bean vegetable oil available in 500 GRM / 1 / 5 / 20 / 25 / 35 / 200 Ltr
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

MetaSorb Activated Carbon

Product Description | Product Application | Product Notes| Product DOSE
Coconut Shell Based Activated Carbon manufacturer and supplier
Code:
RXSOL-68-3107-030
Other Equivalent Brand

ORGANOSORB, GoldSorb 5500

Short Description:
Activated Carbon is a very active product with a high proportion of medium and large pores. It is recommended for the adsorption of large quantities of high molecular weight substances.
Generic Name:
Coconut Shell Based Activated Carbon
Active Matter:
100
MetaSorb Activated Carbon
Application:
Activated carbon is useful in drinking water treatment because it acts as an adsorbent , and can effectively remove particles and  organics from water. These organics are of great concern in water tr [+] Read More...
Using Procedure:
An amorphous from of carbon characterized by high adsorptivity for many gases, vapors, and collodial solids. Used for water and air purification, solvent recovery, waste treatment, removal of sulfur oxide from stack gases and "clean'' rooms as deodorant, and for air conditioning.
Note:
Technical Specifications:

 

Physical

Appearance: Dark grey/black powder
Specific Gravity: .22-.32
Pour Point: 2150ºC
Flash Point: Not flammable

Chemical

Type: Charcoal
Solubility: Negligible (water, oil)
pH: 4.0-6.0
Microtox: Not applicable

Remarks:

RXSOL Group of industries popular and certified largest manufacturer & exporter of Superior and Quality activated carbon in India. Activated Carbon Helpfull to provide Decolourisation and Purifications solutions, Air Purification, Water Filtration etc.
WOOD BASED POWDERED ACTIVATED CARBON
WOOD BASED GRANULAR ACTIVATED CARBON
COCONUT SHELL BASED GRANULAR ACTIVATED CARBON
COAL BASED GRANULAR & POWDER ACTIVATED CARBON
PELLETS ACTIVATED CARBON
 
What Is Activated Carbon
Activated carbons are manufactured from coconut shell, peat, hard and soft wood, lignite coal, bituminous coal, olive pits and various specialty materials.
 
Activated carbons are manufactured from coconut shell, peat, hard and soft wood, lignite coal, bituminous coal, olive pits and various specialty materials. Manufactured by chemical or high temperature steam activation, this highly porous adsorptive medium has a complex structure that is composed primarily of carbon atoms. Its network of pores within a rigid carbon skeleton consists of disordered layers of carbon atoms which are linked together by random chemical or carbon bonds.
 
 
 
APPLICATION AREA
 
Air & Gas Treatment
Water Treatment
Pharmaceuticals Industry
Gold Recovery
Food & Beverages
Automotive Industry
Mercury Removal
Biogas Industry
Protective Equipments
Petrochemicals Catalyst
Cigarette Filters
Soil Remediation

Coconut Shell Based Activated Carbon manufacturer, supplier and exporter in Mumbai, Kandla - Gandhidham, Chennai, Visakhapatnam, Kolkata, Dubai, Fujairah, Sharjah, Abu Dhabi, Oman - Muscat.

MetaSorb Activated Carbon
:
Packing Size:
25.00 Kg Granules
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

SULFAMIC acid GP GRADE

Product Description | Product Application | Product Notes| Product DOSE
SULFAMIC ACID GP GRADE RXSOL Sulfamic Acid Gp Grade Is An Effective Descalant And Is Used For Cleaning of A Variety of Industrial Equipments And Domestic Appliances. RXSOL Industries Sulfamic Acid Gp [+] Read More...
Code:
RXSOL-15-1304-025
Other Equivalent Brand
Short Description:
RXSOL Sulfamic Acid Gp Grade Is An Effective Descalant And Is Used For Cleaning of A Variety of Industrial Equipments And Domestic Appliances.
Generic Name:
SULFAMIC ACID GP GRADE
Active Matter:
81-90
SULFAMIC acid GP GRADE
Application:
Application and Dosage RXSOL Sulfamic Acid Gp Grade Is Used In Various Applications And At Different Concentration Ratio Depending Upon The Amount And Type of Deposit And System Parameters.
Using Procedure:
Normally For A System With Hard Scale Deposits A 5-10% W/W Solution Is Recommended. Preferably This Solution Should Be Made With Pre-Heated Water At 70-80oc. The Total Volume of Solution Should Be About 1.2 [+] Read More...
Note:
RXSOL Sulfamic Acid Gp Grade Is Non-Inflammable And, Unlike Hydrochloric Acid, Does Not Give off Obnoxious Fumes. The Safety of RXSOL Sulfamic Acid Gp Grade Has Been Further Increased By The Addition of Co [+] Read More...
Technical Specifications:
Remarks:
Important
For Extremely Rock Hard And Thick Scaling It Is Recommended To Soften The Scale Prior To Descaling By Recirculating And Soaking 5-10% Solution of RXSOL antiscale  For 2-3 Hours Followed With Rinsing With Plain Water Before Dosing Descalant
In Case of High Silica And Iron Deposits Add 2-3 Parts RXSOL-11-1102-025 To 10parts of Sulfamic Acid
After Dosing Chemical Never Heat Solution By Firing Burners
Handling Measures and Precautions
Proper Human Safety Products Such As Splash Goggles, Lab Coat, Vapor Respirator, Gloves And Boots Should Be Worn While Handling And Applying Chemicals. Splashes On Skin Should Be Washed off With Water Immediately. In Case of Splashing Into The Eyes, Flush It With Fresh Water And Obtain Medical Attention. Should Not Be Injected. Please Refer Msds For More Details.
 
Storage
This Product Should Be Stored In Original Containers In Cool And Dry Place, Away From Sources of Heat, Flame And Direct Sunlight. Please Refer Technical Data Sheet, Label And Msds For More Details And Shelf Life.

Sulfamic Acid manufacture, exporter and supplier in India UAE Middle East, Oman, Nairobi Kenya. Sulfamic Acid supplier in Mumbai, Gandhidham, Kolkata, Chennai, Visakhapatnam, Fujairah, Ajman, Abudhabi, Dubai, Sharjah, Barka Muscat Oman, Africa, Canada

SULFAMIC acid GP GRADE
:
Packing Size:
25.00 Kg.PWD
Available Packing Size:
5 Kg, 20, 25 Kg and 50 Kg
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

PROPYLENE GLYCOL USP

Product Description | Product Application | Product Notes| Product DOSE
Propylene glycol is a humectant, which means that it is an ingredient that is added to cosmetics to increase moisture retention in skin and hair. Propylene glycol is well tolerated by the skin and shouldn't cause redness or irritation.
Code:
RXSOL-15-1615-215
Other Equivalent Brand

Propylene glycol also called 1,2-propanediol or propane-1,2-diol, is an organic compound with formula C3H8O2, MPG 215 Kg

Short Description:
Propylene Glycol USP is a widely used ingredient in pharmaceutical, food, cosmetic, personal care, flavors and animal feed applications
Generic Name:
1,2-propanediol or propane-1,2-diol
PROPYLENE GLYCOL USP
Application:
It is used to absorb extra water and maintain moisture in certain medicines, cosmetics, or food products. It is a solvent for food colors and flavors, and in the paint and plastics industries. Propyl [+] Read More...
Using Procedure:
According to the Material Safety Data Sheet on propylene glycol, the chemical is a strong skin irritant, and has been implicated in contact dermatitis. 
Note:
Propylene glycol is tolerated well by the skin and shouldn't cause redness or irritation. Propylene glycol is a penetration-enhancing humectant.   Propylene Glycol USP is a widely used ingredient in pha [+] Read More...
Technical Specifications:

 

Chemical Name : 1,2-Propanediol
Formula : CH3-CH(OH)-CH2OH; C3H8O2
Molecular Weight (g/mol) : 76.10
Assay : >99.8% by weight
Moisture : < 0.2% by weight
Boiling Point, 101.3 kPa (1 atm) : 187°C (369°F)
Distillation Range, 101.3 kPa (1 atm) : 186–189°C (367°F–372°F)
Vapor Pressure, 25°C : 0.017 kPa (0.13 mm Hg)
Freezing Point : Super Cools
Pour Point : < -57°C
Specific Gravity : 1.075 - 1.077
Refractive Index n20/D, 20°C : 1.4310–1.4330
Viscosity, 25°C : 48.6 centipoise (mPa.s)
Specific Heat, 25°C : 2.51 J/g°K
Flash Point,  Closed Cup : 104°C (220°F)
Autoignition Temperature : 371°C (700°F)
Thermal Conductivity, 25°C : 0.2061 W/m°K
Electrical Conductivity, 25°C 10 micro S/m

 

Remarks:

Propylene Glycol USP,  is a high-purity grade of monopropylene glycol for use in pharmaceutical, food, cosmetic, personal care, flavor and fragrance, plus a variety of other applications.It is a light, transparent liquid, almost odorless and with low volatility. It is completely soluble in water and in most organic solvents. In addition, all propylene glycols have a great capacity to hold and dissolve active ingredients equally which allows them to serve as carriers of aromas, flavors, dyes and moisture. 

Propylene Glycol USP is tested for compliance with the current USP, EP, and Japanese Pharmacopoeia (JP) specifications plus the Food Chemical Codex (FCC); it also complies with the Brazilian Pharmacopoeia, and other pharmaceutical, cosmetic and food regulations in the global markets where it is sold. It is listed by the Cosmetic, Toiletry and Fragrance Association as an approved ingredient in cosmetics and its use is reviewed by the Cosmetic Ingredient Review (CIR). Propylene Glycol USP is Kosher certified and complies with Halal requirements.

Storage and Handling :

Propylene Glycol USP is stable for at least two years when stored at ambient temperatures in closed containers and away from sunlight and other sources of UV light.Where product heating is utilized (i.e. for bulk storage and/or transport containers) the product temperature should be controlled to prevent unintentional overheating over extended periods as this may potentially lead to accelerated oxidative degradation of the product.

Mono Propylene Glycol MPG exporter and supplier in Mumbai, Chennai, Kolkata, Visakhapatnam, Gandhidham, Fujairah, Dubai, Ajman, Abudhabi, Muscat Barka Sohar, Oman, Canada, Sudan, Yemen, Michigan USA, Kuwait

#MonoPropyleneGlycolMPG_UAE
#MonoPropyleneGlycolMPG_Dubai
#MonoPropyleneGlycolMPG_Muscat
#MonoPropyleneGlycolMPG_Kuwait
#MonoPropyleneGlycolMPG_Mumbai
#MonoPropyleneGlycolMPG_Kolkata
#MonoPropyleneGlycolMPG_Visakhaptnam

PROPYLENE GLYCOL USP
:
Packing Size:
215.00 Kg.Liq
Available Packing Size:
Mono Propylene Glycol MPG is available in 25, 50, and 215 kg Metal Drum / HMHDPE drums.
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Odor Control

Product Description | Product Application | Product Notes| Product DOSE
Code:
RXSOL-37-8345-220
Other Equivalent Brand

Vaportek Odor Neutralizer original classic neutral scent, Hydrex 6895, Odor Eliminator

Short Description:
RXSOL Odor Eliminator was developed to absorb for the strong acid odours, mainly Hydrogen Sulphide, Methyl Mercaptan and other gases, associated with sewage and fatty wastes.
Generic Name:
Odor Eliminator
Active Matter:
95-99
Odor Control
Application:
RXSOL Odor Eliminator is also used in industries where hydrocarbon odours are a problem. Specifically, odorous compounds such as Benzene, Toluene, Ethyl benzene, Xylene, Naphthalene, and PAH’s (Polyc [+] Read More...
Using Procedure:
RXSOL Odor Eliminator  can be applied by using one of the following methods to control odour.
Note:
Our valuable Swimming pool chemicals.... Dry Acid Chlorine Tablet  Tica Tablet trichloro isocynuric  Food grade anti-scalant  Food grade Chlrone Granual or Tablet Hiclon /Aquafit chlora Food gr [+] Read More...
Technical Specifications:

RXSOL Odor Eliminator is different to nearly all other odour neutralisers or masking agents. The difference lies in the product makeup: nearly every product in the market is a blend of essential oils or plant extracts combined with a standard surfactant while RXSOL Odor Eliminator is made of food and cosmetic grade compounds and contain only 1% essential oils or plant extracts (by total volume of concentrate). Basic chemistry proves all essential oil and plant extract based products cannot truly neutralise odours; they can only mask them or encapsulate them for a period before releasing them again. Essential oils and plant extracts cannot bind to, and react with, a compound such as H2S and change the structure of that volatile compound into a non-volatile compound.

Remarks:

1) Fogging System 2) Vapour Phase System 3) Direct Dosing into liquid

It is worth explaining, that, unlike masking agents,RXSOL Odor Eliminator does not blow away in the wind. Being positively charged, it will seek out target molecules and bond to them resulting in a chemical reaction forming a non-volitile organic salt. If a RXSOL Odor Eliminator molecule does not find a target, it will attach itself to a negatively charged surface and wait for an odorous molecule. As with all gases, the odorous molecules are constantly moving and, given time, will come into contact with a  RXSOL Odor Eliminator molecule and be destroyed.

Fogging System:

Fogging systems spraying RXSOL Odor Eliminator  are used when odour is from open-air sources.RXSOL Odor Eliminator is sprayed on an interval basis depending on odour type and strength. An example of this is running the system for 30 seconds ON and 2 minutes OFF.

Some examples of facilities where fogging systems can be used:
 

  • Waste Water/Sewage Treatment Plants
  • Refuse Transfer Stations
  • Steel Manufacturing Slag Beds
  • Contaminated Soil Remediation
  • Pig Farms
  • Sludge Lagoons


Fogging systems spraying RXSOL Odor Eliminator  is also used in indoor facilities. Some examples are:
 

  • Sewage Pumping Stations
  • Slurry Pits


Vapour Phase Systems :

Vapour phase systems delivering  RXSOL Odor Eliminator is used when odour is from ducted, or confined, air sources. This type of application is designed to inject the vapour into a continuous flow air stream that is part of an exhaust or extraction process. These types of systems are delivering vapour into the air stream continuously. Some examples of these types of problems are:
 

  • Manufacturing Process Exhaust Airflow
  • Sewage Plant Air Extraction
  • Sewage Pumping Stations
  • ANY air emissions vented to atmosphere


Direct Dosing:

RXSOL Odor Eliminator  is exceptionally effective in capturing its target in a liquid solution. Liquid solutions only produce odours when they reach a point where cavitation occurs, say at the end of the pipe or weir. Odour is produced as a result of the reduction in water pressure and the odorous gases are stripped out of solution.

This method of application is ideal for waste treatment plants, animal and fish processing plants, and pig and chicken farms, which have wash down systems where waste water is collected and stored in a settlement pond system or holding tanks.

RXSOL Odor Eliminator  molecules will attach to the odorous compounds to remove toxins from the water and, over about seven days, will spread through the whole anaerobic/facultative/aerobic pond system to remove odours. This action chemically bonds (valency bond) to the odorous compound to form a non-toxic, non-odorous organic salt. Bacteria will then break down this salt. As a result, there is no increase in BOD, and no regeneration of foul odours.

RXSOL Odor Eliminator can best be thought of as a detoxifying catalyst that beneficially affects the pond ecology. It is extremely powerful.

RXSOL Odor Eliminator , which is not required to destroy toxic odorous compounds, will continue in the stream and neutralise any air that is stripped from the stream due to water turbulence at the treatment station or ponds.

Odor Eliminator Manufacturer Exporter and supplier in India UAE Oman Kenya Africa - Mumbai, Kandla Surat Gujrat, VASHI TURBHA NAVI MUMBAI Pune Nashik, Kolkata Haldia Paradip, Chennai Ennore, Visakhapatnam, Fujairah Dubai Ajman, Abudhabi, Sharjah Muscat Barka, Sohar, Nairobi Kenya Africa

Odor Control
:
Packing Size:
220.00 Ltr.
Available Packing Size:
RXSOL Odor Eliminator was developed to absorb strong acid odors, mainly Hydrogen Sulphide, Methyl Mercaptan, and other gases, associated with sewage and fatty wastes. Available in 25, 50 and 220 Kg
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

CO2 absorber

Product Description | Product Application | Product Notes| Product DOSE
RXSOL Carbon Dioxide Absorbent is High Performance Grade Absorbent. RXSOL-81-8197-220 is a versatile CO2 absorbent for removal of carbon dioxide and other acidic contaminants from gas streams. It is [+] Read More...
Code:
RXSOL-81-8197-220
Other Equivalent Brand

Carbon Dioxide Absorber, Soda Line, Akors B, CO2 Absorbent Soda Lime, Sodasorb, Biosorb, Soda Lime CO2 Absorbent

Short Description:
Liquid CO2 Absorbent efficiently absorbs CO2 from processes
Generic Name:
Absorption of Carbon Dioxide Gas
Active Matter:
98 - 99%
CO2 absorber
Application:
RXSOL-81-8197-220 is used as an absorbent in gas treating processes for several reasons:   CO2 Absorption: CO2 Absorber RXSOL is effective in selectively absorbing carbon dioxide from gas streams [+] Read More...
Using Procedure:
Note:
• Used for carbonyl sulfide (COS) removal from liquid hydrocarbon streams • Used as a selective solvent for recovery of aromatics from refinery streams • Removes carbon dioxide (CO2) and hydrogen sulfi [+] Read More...
Technical Specifications:

RXSOL-81-8197-220 is a colourless, slightly viscous liquid with a mild amine odour. It is miscible with water, alcohols, and aromatic hydrocarbons but relatively immiscible with aliphatic hydrocarbons and ethyl ether.

Appearance Clear 
Colour, Pt-Co 35 max. ST-30.12
DIGLYCOLAMINE, wt% (by titration) 98 min.
Water, wt%  0.5 max. 
Boiling point, °C  221
Flash point, PMCC, °C 124 
Freezing point, °C -12 
pH 12
Specific gravity, 20/20°C 1
Vapor pressure, mm Hg, 20°C (68°F) < 0.01
Vapor Density 4
Viscosity, cSt, 51.7°C (125°F) 7.5
Water solubility > 10 
Remarks:

Chemical Names: 2-(2-AMINOETHOXY)ETHANOL, Diglycolamine, 929-06-6, 2-Aminoethoxyethanol, Ethanol, 2-(2-aminoethoxy)-, Diethylene glycol amine

Carbon Dioxide Absorbent exporter and supplier in Mumbai, Gandhidham, Kolkata, Chennai, Visakhapatnam, Fujairah, Dubai, Sharjah, Abudhabi, Ajman, Muscat Barka Sohar Oman, Canada, Nairobi Kenya Africa

CO2 absorber
:
Packing Size:
210.00 Kg.Liq
Available Packing Size:
210 Kg, 25 Kg, and 1000 Kg IBC Tanks available
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

CHLOR RXSOL

Product Description | Product Application | Product Notes| Product DOSE
RXSOL OXY CHLOR 12 is a sanitizer and To be used to disinfect drinking water that controls microorganisms such as bacteria, yeast and mold. RXSOL OXY Chlor 12 is greenish yellow liquid miscible in an [+] Read More...
Code:
RXSOL-95-3034-025
Other Equivalent Brand

Chlor 12 , CLF-35 Chlorination, purollux, NEO-CHLOR, SUDCHLOR

Short Description:
12-15 percent free Chlorine Solution for Sterilization of waterClear greenish-yellow liquid miscible in any proportion with water.
Generic Name:
14 % free Chlorine Solution for Sterilisation of water
Active Matter:
12-15
CHLOR RXSOL
Application:
RXSOL CHLOR-12 chlorine liquid is effectively used for water purification of swimming pools, Jacuzzis, sewage and waste water systems for water disinfection and oxidation. Powerful chlorine microorganisms cannot build up any resistance to it.
Using Procedure:
Residual chlorine in drinking water tanks should range between 0,5 and 2 (max) ppm, to ensure wide range antibacterial protection.  For 2 ppm in drinking water tank, USE  20 ml of RXSOL-31-3034-025   for every MT ( 1000 Ltrs )  of water.  
Note:
RXSOL OXY CHLOR 12 manufacturer and supplier in Mumbai, Kandla, Mundra, Sikka, Surat, Vizag - Visakhapatnam, Gangavaram, Kolkata, Haldia, Chennai, Ennore - MiddleEast Dubai, Fujairah.
Technical Specifications:

12.5% wt. SODIUM HYPOCHLORITE - EXTRA - PURE

Parameters Specification Range Typical

Chlorine Mix

12.5 - 13.2 13.0
Available Chlorine (%wt) 11.9 - 12.6 12.4
Available Chlorine (%vol) 14.3 - 15.3 15.0
Available Chlorine grams/liter 143 - 153 150
Excess Caustic (%wt) 0.25 - 0.80 0.30
Specific Gravity @ 60°F 1.197 - 1.220 1.210
pH 12.0 - 13.0 12.50
Iron (Fe) ppm <0.5 0.05
Nickel (Ni) ppm <0.2 0.02
Copper (Cu) ppm <0.2 0.05
Mercury (Hg) ppb 0.001 - 0.003 0.002
Sodium Chloride (NaCl)% <15.0 12.5

Appearance: Clear greenish-yellow liquid miscible in any proportion with water.
This product meets the requirements of NSF standard 60 for drinking water.

Remarks:

Never use materials without proper knowledge and guideline, Refer MSDS and Technical bulletine before uses of this product.

14 % free Chlorine Solution for Sterilisation of water
Keep Bacteria Free
Suitable to use with Automatic Dosing Pump

CHLOR RXSOL manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of CHLOR RXSOL at a competitive price from us. We have ready stock of CHLOR RXSOL in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

CHLOR RXSOL
:
Packing Size:
25.00 Ltr.
Available Packing Size:
1Ltr, 5, 10 ltr., 20, 25, 50, 210 Ltrs and 1000 Ltr IBC TANKS
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Descalant Powder with Colour Indicator

Product Description | Product Application | Product Notes| Product DOSE
Code:
RXSOL-37-8865-025
Other Equivalent Brand

Hydrex 5201, Accepta 2316, Sulfamic Acid Descaler Cleaner with colour indicator Inhibitor, Sulfamic Descaler with colour indicator Inhibitor, Descalant Inhibitor with Colour pH Indicator

Short Description:
Powdered Inhibited Acid Descaler Cleaner with colour indicator Inhibitor can be used for removing scales obtained from water in heating and cooling systems e.g. boilers, condensers, heat exchangers, jackets and coils
Generic Name:
Descaling powder with colour indicator
Active Matter:
95-96
IMPA Code:
550970, 550971
Descalant Powder with Colour Indicator
Application:
Fast and effctive scale remover. It is a superior heavy duty POWDER containing accelerators, corrosion inhibitors & wetting agents with scale dissolver. Specifically formulated to remove rust and wat [+] Read More...
Using Procedure:
DIRECTION OF USAGE •    Machines should be rinsed with water to remove loose flakes & sludge's before use •    Powder should be added to warm water for an ideal solution •    The sample should be prope [+] Read More...
Note:
Powdered Inhibited Acid Descaler with Colour pH Indicator Packing  Inhibited Powder Acid is available in H.D.P.E. bags of net 25 and 50 Kgs. Material. Sample packets of 100-200 gms. are supplied on requ [+] Read More...
Technical Specifications:

 

APPLICATION : Boilers, calorifiers, heat exchanges, diesel engine cooling system, condensers, evaporators & other type of equipment where rust & scale form. 

Appearance

Reddish / Yellowish / white – Powder ( without indicator )  
Density         1.2g/cm3
pH                 (10 wt %):1.1

 

Compatibility
Metal    Suitable aluminium, zinc, tin and their alloys. Stainless steel, Carbon Steel, Cast Iron, Titanium, Copper , Copper alloys, PVC, Plastic , Rubber  Rubber No known effect
Rubber No known effect
Remarks:

Efficiency :Rapid Softening, disintegration and dissolving of scales.

Economy

By reducing down-time, productivity is increased. by protecting metal and by uniform leaning of the surface equipment life is prolonged and performance made superior. The above information is adequate for commonly encountered problems of descaling.

Handling & Storage

Safety

•    No Fumes Avoid contact with skin or eyes. Wear Cup-type, rubber or soft plastic-framed goggles, protective clothing, and rubber gloves must be worn when handling.

•    Keep in a tightly closed container. Protect from physical damage.

•    Store in a cool, dry, ventilated area away from sources of heat, moisture and incompatibilities.

•    Containers containing this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

•    Ensure as low exposure as possible. Local exhaust ventilation is generally preferred as it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.

The self-indicating grade that changes colours to indicate that the efficiency of material has been finished.
Colourless Solution showing Powerful Strength.
Light Brown-Yellow Solution indication Poor strength, In this stage addition of more powder required to dissolve the scale.
Blue colour solution will result in neutralization of Acidic Power, After completion of Descaling process system must be neutralized with ALKALI SOLUTION. When we'll put alkali solution into the used descaler - solution, Acidic power will get neutralized and BLUE colour will develop.

Suitable and very popular product for DESCALING of high and low pressure boilers, Heat EXCHANGERS etc. Its corrosion inhibitor blend PROVIDE metal protection

This is mixed with fresh water 3 to 20 percent depending on deposition of scaling. After using RXSOL-37-8865-025, Rinse all metal surfaces with 0.5 percent of RXSOL-20-2059-025 at least 2-4 house, up to neutrial of PH valve.
 

Procedure-of-use: The most effective descaling is accomplished by circulation.In the case of small components,the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease or sludge, then pre-cleaning with DEGREASER ( RXSOL OB 1005 ) is necessary. Depending on the extent of scaling, use a solution of 2.5-10% RXSOL-37-8865-025 . The solution will have a red colour which changes to orange when 85% of the acid has been neutralized , & to colourless  when the solution is totally neutralized. Whenever possible, the solution should be heated to 60°C.Neutralised  solutions can be re-activated by adding more RXSOL-54-1008-025  until the red colour reappears. This should not be done more than twice. RXSOL-37-8865-025  should not be used on Aluminium , Zinc, Tin or Galvanized surfaces.

Fields: Descaling of  Boilers, Descaling  of Diesel Engine Cooling Systems, Condenser, Pipeline collection system, Evaporators, Calorifiers, Heat Exchangers,The strength of the acid can be enhanced by adding 1part sodium chloride (common salt) to 20 parts of Descale Powder.If salt is not available, an acceptable alternative is to dissolve RXSOL-37-8865-025  in  water. After use of RXSOL-37-8865-025  a  0.5% solution of Alkalinity Control in fresh  water should be used for neutralization.

Evaporators, Calorifiers, Heat Exchangers:
The strength of the acid can be enhanced by adding 1 part sodium chloride (common salt) to 20 parts of Descale Powder RXSOL-37-8865-025. This enhancement of the cleaning solution, however, should not be used when descaling diesel engine cooling water systems. After use of Descale Powder a 0.5% solution of Alkalinity Control in fresh water should be used for neutralisation.

After using  RXSOL-37-8865-025, Rinse all metal surfaces with 0.5 percent of RXSOL-20-2059-025, at least 2-4 hour , up to neutral of PH value.

• Fast and effective scale remover.
• Soft on ferrous metals.
• Removes water scale & rust from boilers/diesel engine & other cooling system
• As well as from condensers, evaporators, & heat exchangers etc
 

Why Use RXSOL Descaler?

  • It is a safe , economical concentrated  chemical to be used on the waterside of heat transfer equipment.
  • You do not have to heat RXSOL-37-8865-025 .
    RXSOL-37-8865-025  is safer for the employees to use than other acid products.
  • Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).
  •  Cleans down to the original surface without pitting.
  •  RXSOL-37-8865-025 is safe on copper, copper-nickel, bronze, brass, iron, stainless steel and rubber.
  •  RXSOL-37-8865-025  will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.
  •  Removing the scale build up allows your equipment to operate more efficiently with less down time.

Descaling Chemical manufacturers, Descaling Chemical suppliers, Descaling Chemical producers, Descaling Chemical exporters

RXSOL-37-8865-025 Descaler Descalant Powder with Colour Indicator manufacturer and supplier in Kakinada, Visakhapatnam, Andhra pradesh, Mumbai, Navi Mumbai MIDC, Panvel, Taloja, Pune, Nashik, Gandhidham, Kandla - GIDC, Mundra, Jamnagara, Sikka, Surat Hazira, Chennai Ennore, Kolkata, Howrah, Paradip,Sohar, Barka Muscat Oman, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Diera, UAE Middle East, Varanashi, Patna, Ranchi, Tata, Munger, Nairobi Kenya Africa, Canada

#SulfamicACID_AlexandriaEgypt

Descalant Powder with Colour Indicator
:
Packing Size:
25.00 Ltr.
Available Packing Size:
Descalant powder Inhibitor with Colour Indicator available in 500 Grm / 1 / 5 / 10 / 20 / 35 / 50 Kg packing
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

BRINE CORROSION INHIBITOR

Product Description | Product Application | Product Notes| Product DOSE
Code:
RXSOL-81-4049-210
Other Equivalent Brand

Brine Inhibitor 79337

Short Description:
Fatty amine derivative with biocide and oxygen scavenger
Generic Name:
BRINE CORROSION INHIBITOR BIOCIDE
Active Matter:
81-90
BRINE CORROSION INHIBITOR
Application:
Corrosion Inhibitor chloride brine closed re-circulating cooling systems.
Using Procedure:
The recommended dosage for Brine Corrosion Inhibitor RX is 17.5 litres per tonne of brine in the system. Brine Corrosion Inhibitor Rx may be added directly to the system either neat or in a water dilution. [+] Read More...
Note:
Features Formulated for brine cooling systems Liquid - easy to handle. Multi metal corrosion protection. Benefits Can be used to replace chromate technology
Technical Specifications:

Physical Properties :

- Odour: Odourless
- Appearance: colourless to yellow, miscible with water
- pH 11,5 - 14
- Boiling point 100 °C at 760 mm /Hg
- Density 1,155 - 1,190 g/cm3 at 20 deg C

Remarks:
Miscibility Dose 10% v/v can be use in NaCl and CaCl2 Brine reicrulating solution
 
1% by Volume in Brine Having Specific Gravity of 1.15
 
Efficiency : 90% minimum corrosion protection

BRINE CORROSION INHIBITOR Exporter in UAE Middle East Oman India Nairobi Kenya Africa. BRINE CORROSION INHIBITOR manufacturer and supplier in Mumbai, Dubai, Kolkata, Fujairah, Chennai, Sharjah, Visakhapatnam, Abudhabi, Gandhidham Gujrat, Barka, Sohar, Muscat Oman, Nairobi Kenya Africa

BRINE CORROSION INHIBITOR
:
Packing Size:
210.00 Ltr.
Available Packing Size:
BRINE CORROSION INHIBITOR available in 25, 210 and 1000 Ltr IBC TANK.
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Heat Transfer Salt HT 400

Product Description | Product Application | Product Notes| Product DOSE
Heat transfer salt for the chemical industry for use at high temperatures. Salt inhibited with the corrosion inhibitor resulting corrosion protection, as well as suitable for high working temperature m [+] Read More...
Code:
RXSOL-19-1436-025
Other Equivalent Brand

Heat Transfer High Temperature Salt more the 400 degree

Short Description:
Salt inhibited with the corrosion inhibitor resulting corrosion protection, as well as suitable for High Temperature heat transfer.
Generic Name:
Heat Transfer Salt High Temperature 400
Active Matter:
94
Heat Transfer Salt HT 400
Application:
Heat Transfer Salt kept in between steam and direct-fire heating.  Heat Transfer salt has low melting point  to create a molten salt bath also have high heat transfer rate and its proprietory blend o [+] Read More...
Using Procedure:
Heat Transfer Salt with the increased use of high-temperature operations, the chemical and petroleum process industries need an economical, efficient, heat transfer medium that is between steam and direct-f [+] Read More...
Note:
Now a days Uses of Molten Salts as a Heat Transfer Fluid and Thermal-Storage Medium is common. One of the most commonly used molten salts is a eutectic blend of sodium nitrate and potassium nitrate.  [+] Read More...
Technical Specifications:

 

Main Ingredients   : Salt Mixture with Corrosion Inhibitor
Inhibitors and
water
 
6
Inhibitors
: 6 %
Colour Bright : Yellow
Nitrite Content : 7.5 to 8.5%
Chloride Content  0.10% Max.
pH of solution : 9.5 - 10.5
Odour            : PRACTICALLY ODOURLESS
Solubility in water        : SOLUBLE
Working Temp Range : > 400 Deg.C
Density @ 20 Deg.C : 1160 Kg/m3
Reverse Alkalinity         : Minimm 15.0 ml
Vapour pressure    : .07 mbar at 20oC
Hear Transfer Salt TR : 155
Skin absorption/irritation       : YES
TLV       Country     :  
Pollution category    1994       : III
 
Remarks:

Why use Heat Transfer molten salts?

Heat Transfer Salt extend the upper range of the temperature limits in which a liquid heat transfer media can be used.

The molten salts most commonly used in heat transfer applications are the nitrate salts due to their low melting point, high operating temperature, thermophysical properties, low toxicity, low vapor pressure and corrosion performance.
 
The most common nitrate molten salts generally are a eutectic blend of sodium nitrate and potassium nitrate. Individual salts can be used, but by combining the two different salts together, the melting point is reduced. This allows for lower minimum operating temperatures and thus reduces the chance of freezeup. Sodium nitrate has a melting point of 584°F (307°C), and potassium nitrate has a melting point of 631°F (333°C). By mixing the two together, however, you can create a salt blend with a melting point of 431°F (222°C). This significantly expands the operational flexibility of the salt used in high temperature applications.
Temperature Range of Heat Transfer Salt?
 
Molten Salt  ( The sodium nitrate/potassium nitrate salt ) Can Operate  generally is used from 545 to 1049°F (285 to 565°C)
 
Benefit of Heat Transfer Salt Generally, nitrate salts provide a balance of wide operating range, thermal stability, corrosion performance and cost.
 
 
Advantage of the nitrate salts is corrosion performance . Nitrate salts are compatible with stainless steels up to 1049°F (565°C) and even carbon steel if the operating temperature is kept below 752°F (400°C). This makes them advantageous to use with common materials of construction to keep costs low. It is not advised to use yellow metals such as copper or brass with molten salts because they are not as compatible as steel at higher temperatures.
Heat Transfer Salt Molten salts are also used in applications of solar power plants (CSP), where the salt can store heat obtained from sunlight for long periods of time. Some of these CSP systems flow the salt directly through the receiver tubing, where sunlight hits a parabolic mirror and concentrates the sunlight to a tube in which the salt flows. 
 
Other systems may use molten salts for preheating natural gas lines or keeping reactors hot by using the molten salt in the jacket around a tank. Salts also have relatively high latent heat capacity — similar to many of the phase-change waxes that are used today — and are sometimes used in phase-change applications. When salts melt, they absorb large amounts of heat, and when they freeze, they release large amounts of heat. By utilizing this phenomenon, it is possible to create advanced thermal storage or temperature-regulating systems, depending on the process.

Heat Transfer Salt manufacturer and supplier in Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam, Barka - Oman, Muscat, Fujairah, Dubai, Sharjah, Abudhabi, Ajman, Oman Muscat Barka, Canada, Nairobi Kenya, Uganda Africa, Bahrain

Heat Transfer Salt HT 400
:
Packing Size:
50.00 Kg.PWD
Available Packing Size:
25, 50 Kg. Bag and JAR packing
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

RX MARINE INTERNATIONAL is most popular chemicals source in INDIA, Keeping ready stock at 5 LOCATION which includes Mumbai, Kandla - Gandhidham, Vizag - Visakhapatnam, Ennore - Chennai, Kolkata more then 3000 types of chemicals. Please click here to get PRODUCT Categories details http://rxmarine.com/Products

 

Mail Us for any PRODUCT related information and purchase inquiry : mail@rxmarine.com ( This mail is for customer / Buyer only ) And if you wants to add your hand as a supplier, And if you have volume manufacturing capacity of chemicals, pl. drop your mail at rxmarine@gmail.com ( This mail is for supplier only )

 

 

Syndicate content